• USD $ 1750 MSRP - Non Heated
  • USD $ 1800 MSRP - Heated

With 30% Federal Tax Credit

  • USD $ 1225 MSRP - Non Heated
  • USD $ 1260 MSRP - Heated

RELIABLE ENERGY STORAGE, SIMPLE CONFIGURATION AND QUICK INSTALLATION.

The AES RACKMOUNT Energy Storage System performs reliably, installs quickly and configures easily for Off-Grid Solar, Whole-Home Backup Power and Microgrids.

Stack up to six RACKMOUNT Battery Modules with the Quick Stack Rack and parallel them with a single RACKMOUNT Battery Combiner in under 40 minutes.

Or install up to six RACKMOUNT Battery Modules in a RACKMOUNT Slimline Enclosure in under 40 minutes for outdoor use.

The Slimline Enclosure with RACKMOUNT Battery Modules installed is UL9540 DC ESS certified, enabling permitting throughout North America. 

Dramatically elevate battery charging performance by networking up to thirty-six RACKMOUNT Battery Modules in closed-loop communication with industry-leading low-voltage hybrid inverters.

.

FILTERS

Applications
Nominal Voltage
Open Circuit Voltage
Rated Ah Capacity (1C)
Nominal Energy (kWh)

About the AES RACKMOUNT System

Watch our video for a brief introduction to our newest 48V energy storage system design for off-grid, whole home backup and microgrid installations.

Image

Optimize your Solar Installation with our Battery Sizing Tool

Easily estimate the number of batteries for your solar setup using our comprehensive solar calculator. By inputting your AC Load requirements, desired runtime, and number of inverters, our tool provides precise battery recommendations tailored to your unique installation needs. Ensure efficient energy storage and maximize your solar system's performance.


AES RACKMOUNT Battery Module

AES RACKMOUNT Battery Modules are manufactured with the highest-grade cobalt-free LiFePO4 cells for safety, reliability and long life. The high-current GEN-4 BMS delivers superior peak power for demanding load support and lightning-fast 1C charge and discharge rates.

Networking AES RACKMOUNT Battery Modules with the LYNK II Gateway enables plug-and-play closed-loop communication with industry-leading hybrid inverters and dramatically elevates charging performance.

AES RACKMOUNT Battery Modules are available with a BMS-managed heat mat for operation in cold climates.



Image

Closed-Loop Inverter Partners

Parallel Power
  • Up To 180 kWh (per LYNK)
  • Linear Scaling of Charge, Discharge, Peak Capacity
Surge Power
  • Up to 2.2C Peak Power
  • Up to 1C continuous charge/discharge
Dynamic Performance
  • Up to 40% Faster Recharge from 0% to 100% SoC
  • Real-Time Optimization of the Charge Rate
Charges Faster
  • 1C Continuous Charge Rate, Regardless of SoC
  • 2x Faster than C/2 Rated Lithium Batteries
Lasts Longer
  • 10x the Life of Lead-Acid (BCI-06)
  • 10-Year Warranty and Energy Performance Guarantee
Runs Longer
  • 2x Runtime of Lead-Acid
  • 100% usable capacity
High Efficiency
  • Up to 50% more energy efficient than a lead-acid battery
  • Up to 98% round-trip efficiency

How do I work with Bloom Power?

Bloom sells through solar industry distributors and installers. We do not sell directly to homeowners.

If you’re a solar industry professional tell us about yourself and a member of our sales team will reach out to you shortly.  
Image

AES RACKMOUNT Product Registration

The AES RACKMOUNT LiFePO4 product family offers an industry-leading warranty for years of trouble-free, high-performance operation.

Click on the REGISTER PRODUCT button and use the form to register your product(s) to validate your warranty.


LYNK ACCESS PC Software

  • Configure LYNK Device
  • Monitor Bloom Lithium Batteries
  • Troubleshoot and monitor Bloom Lithium batteries
  • Simulate and validate integration of Bloom Lithium Batteries
Image

AES RACKMOUNT Components

AES RACKMOUNT Slimline Enclosure 950-0053

  • Indoor, Outdoor 
  • Battery Combiner 
  • Battery Cables 
  • Closed-Loop Comms 
  • Parallel 180 kWh 
  • UL 9540 DC ESS Certified*
  • Seismic AC 156* 

* When installed using the AES Slimline Enclosure 950-0053

Bloom Power reserves the right to adjust this product without notice or obligation. The image shown is for reference use only, and models may vary from those displayed.


Image
Image

AES RACKMOUNT Quick Stack Rack 950-0050

An open battery stacking system that is flexible, secure, and set up in only a few minutes.

  • Stack up to six battery modules and a battery module combiner
  • Brackets interlock without tools
  • Facilitates air gap between batteries, reducing heat transfer
  • This installation method is not certified to UL9540


AES RACKMOUNT Battery Module Combiner 950-0049

Parallel up to six AES RACKMOUNT Battery Modules with a single AES RACKMOUNT Battery Combiner.

  • Fully assembled
  • 19-inch rackmount - enclosure ready
  • Six quick-connect fused battery cable sets
  • Master double pole disconnect breaker
  • Single button power off


Image

Accessories

LYNK II - 950-0025

Advanced Integration - Faster Charging

Unlock the full potential of an AES RACKMOUNT LiFePO4 Solar Stationary battery by enabling the BMS to optimize and dynamically manage the charge configurations of the world’s best industrial chargers and mobile inverter-chargers. The LYNK PORT on each AES RACKMOUNT LiFePO4 allows for real-time closed-loop communication between multiple batteries and with a charger, or inverter-charger, using LYNK II to aggregate and communicate the State of Charge.


Image
Image

SurLok Plus Connector Kit - 950-0054

For installers wishing to install AES RACKMOUNT modules with their own wiring, this kit is available with both DC positive and negative connectors.


Cable Kit - 950-0055

For installers not wishing to use the AES RACKMOUNT combiner, this cable kit includes both DC positive and negative wires with SurLok Plus connectors and ring terminals. These cables are 3 AWG and measure 2 meters in length.


Image

Related Resources
Application Notes
CAD Files
Case Study
Certifications
Firmware & Software
Logistics & Safety
Manuals
Product Brochures
Technical Guides
Videos
Warranty